RS Aero Forum

Please Register or Login to post to the forum.

Home >> Technical >> centreboard case gasket

centreboard case gasket

I need to redo the centreboard gasket fluff on the bottom where the sand and salt has had its way over the past four years. I have the material and, as Dirk mentioned, it has a self adhesive tape on the gasket fluff. Are you supposed to use an additional adhesive as well? Canada doesn't have Hypabond-contact adhesive and I understand it can't be shipped from England here. Anyone have any ideas of what to use here in North America or will the self adhesive tape last for a bit? Any other tips on how to change it out for a ham-fisted sailor who is anything but handy! It should be straight forward but, if there is a way to mess up, I will find it.

12/07/2019 19:01:00
Phil Minnion
Posts: 2

Hi Peter,

thank you very much for your answer.

The short term solution became quite obvious after unpacking the gasket.

There is a self adhesive strip on the gasket.

I assume that the combination of very warm weather, lots of salt and sand here in Muscat will make the gluestrip on the gasket fail pretty soon.

When I am in Europe next time I'll get a tin of hypabond-contact-adhesive.

Cheers,

Dirk

17/03/2018 13:09:00
Dirk Gramkow
Posts: 4

Hi Dirk, Message from RS Customer Support; Use Hypabond-contact adhesive for glueing daggerboard case gasket

17/03/2018 05:23:00
Posts: 0

Hi all,

anyone an idea which type of glue to use for glueing the centreboard case gasket into the centreboard case?

I tried epoxy but that didn't work as expected.

Cheers,

Dirk

12/03/2018 12:21:00
Dirk Gramkow
Posts: 4

Submit your event
Pay via PayPal

Contact

RS Aero International Class Association
E. Email

RS Sailing
Premier Way
Abbey Park
Romsey
Hampshire
SO51 9DQ

T. 00 44 (0)1794 526 760
W. www.rssailing.com
E. Email